Rack mounts, cables, adapters, calibration kits, cases and other RIGOL accessories. 195 products, each with RIGOL's US list price and quoted on request.
Accessories round out a setup: rack-mount kits, carrying cases and bags, RF cables and adapters, attenuators, calibration kits and test fixtures, power cables and interface converters such as USB-GPIB.
Each accessory page lists the RIGOL instruments it's listed for. RF adapters and cables are specified by connector type and frequency range; match them to your instrument's ports and the highest frequency you'll measure. Calibration kits for the vector network analyzers are listed under the matching VNA series.
If you're not sure an accessory fits, add it to your quote list with the instrument and we'll check compatibility before quoting.
| Part | Description | Fits | List price | Quote |
|---|---|---|---|---|
| CB-DB9-DB9-F-F-150 | RS232 Cable, Female to Female, 150cm | DP700 | $13 | |
| ADP0150BNC | 50 Ohm impedance adapter for oscilloscopes or generators | DS1000Z, DS2000A, MSO2000A, MSO5000, DS7000 / MSO7000, DHO5000 +13 | $19 | |
| CB-20A-780MM | 20A Load Input Cable (30 inch) | DL3000 | $19 | |
| CB-RS232-A | 9-Pin RS232 Cable (female-to-female, cross-over) | $19 | ||
| CB-Sense | Sense Cable | DL3000 | $19 | |
| DL-02 | Terminal Shield | DL3000 | $19 | |
| CB-BNC-BNC-MM-100 | BNC Cable (length 1 meter) | DS1000Z, DHO5000, MHO5000, DHO1000, DHO4000, DHO800 +10 | $20 | |
| M3A2B | Analog Bus to Banana port for M300 | M300 | $21 | |
| 10A-Testing-Cable | 10 A testing cable for DP Series | DP2000, DP700, DP800, DP900 | $25 | |
| CB-40A-780MM | 40A Load Input Cable (30 inch) | DL3000 | $29 | |
| CB-USBA-USBB-FF-150 | USB Cable | DG800 | $29 | |
| PVA9-Steel Wire-015 | Steel wire for handheld probe head (length 30cm, diameter 0.15mm) | $29 | ||
| PVA9-Steel Wire-017 | Steel wire for handheld probe head (length 30cm, diameter 0.17mm) | $29 | ||
| LD-DM | Test Lead Set for DMM | DM3000 | $35 | |
| AD-NF-NF-L-18G | Adapter, N (f) - N (f), DC ~ 18GHz | DNA5000, DNA6000 | $39 | |
| CB-60A-780MM | 60A Load Input Cable (30 inch) | DL3000 | $39 | |
| RA5040K | 40 dB attenuator accessory for oscilloscopes or generators | DS1000Z, DS2000A, MSO2000A, DG1000Z, DG4000, DG5000 +3 | $47 | |
| AD-SMAM-SMAM-L-18G | Adapter, SMA (m) - SMA (m), DC ~ 18GHz | DNA5000, DNA6000 | $49 | |
| USB-LAN | USB2.0 to 100Mbps Ethernet Adaptor | DG800, DG900 | $49 | |
| AD-SMAF-NM-L-18G | Adapter, SMA (f) - N (m), DC ~ 18GHz | DNA5000, DNA6000 | $59 | |
| AD-SMAF-SMAF-L-18G | Adapter, SMA (f) - SMA (f), DC ~ 18GHz | DNA5000, DNA6000 | $59 | |
| AD-SMAM-NM-L-18G | Adapter, SMA (m) - N (m), DC ~ 18GHz | DNA5000, DNA6000 | $59 | |
| CB-SMB-BNC-FF-100 | SMB(F) to BNC(F) cable, 100cm | $59 | ||
| CB-SMB-BNC-FM-100 | SMB(F) to BNC(M) cable, 100cm | $59 | ||
| CB-SMB-SMB-FF-100 | SMB(F) to SMB(F) cable, 100cm | $59 | ||
| RPA246 | Power analysis phase difference correction jig | DS2000A, MSO2000A, MSO5000, DS7000 / MSO7000, MSO8000, DS8000-R | $59 | |
| SPG-DP800 | Green Safty Plug for DP800 | DP800 | $59 | |
| AD-NM-NM-L-18G | Adapter, N (m) - N(m), DC ~ 18GHz | DNA5000, DNA6000 | $69 | |
| BAG-800 | Instrument Carry Case for a DHO800/900, DG800/900 Pro, DM800 | DHO800, DHO900, DG800 Pro, DG900 Pro, DM858, MHO900 +2 | $69 | |
| BAG-DS1000 | Instrument Carry Case for a DS1000 Series Oscilloscope | DS1000Z | $69 | |
| CB-80A-780MM | 80A Red and black test cables | DL3000 | $69 | |
| M3GPIB | GPIB Reverse Entry Adaptor for M300 | M300 | $72 | |
| M3TB16 | ACT Terminal Box | M300 | $74 | |
| SKT7150 | Differential socketed probe head kit | $78 | ||
| AD-3.5F-3.5F-L-26G | Adapter, 3.5mm (f) - 3.5mm (f), DC ~ 26.5GHz | DNA5000, DNA6000 | $79 | |
| AD-3.5M-3.5M-L-26G | Adapter, 3.5mm (m) - 3.5mm (m), DC ~ 26.5GHz | DNA5000, DNA6000 | $79 | |
| AD-NM-BNCF-L-4G | Adapter, N (m) - BNC (f), DC ~ 4GHz | DNA5000, DNA6000 | $79 | |
| AD-SMAF-BNCM-L-4G | Adapter, SMA (f) - BNC (m), DC ~ 4GHz | DNA5000, DNA6000 | $79 | |
| M3TB24 | 24 channel MUX Terminal Box | M300 | $79 | |
| M3TB32 | 32 channel MUX Terminal Box | M300 | $79 | |
| M3TB32T | Terminal Box for MC3132(Dedicated to temperature test) | M300 | $79 | |
| M3TB34 | MFC Terminal Box | M300 | $79 | |
| M3TB48 | MATRIX Terminal Box | M300 | $79 | |
| M3TB64 | 64 channel MUX Terminal Box | M300 | $79 | |
| M3TB20 | 20 channel MUX Terminal Box | M300 | $82 | |
| RM-2-DP700 | Rack Mount Kit for two units | DP700 | $83 | |
| RM-3-DP700 | Rack Mount Kit for three units | DP700 | $83 | |
| MSO5000-FPC | Front panel cover | MSO5000 | $89 | |
| RM-1-DP700 | Rack Mount Kit for one unit | DP700 | $90 | |
| PRSC42 | 2 Way Power Splitter (DC to 4 GHz) | DS8000-R | $99 | |
| RM-1-DG1000Z | Rack Mounting Kit for one DG1000Z | DG1000Z, DSG800, DG2000 | $100 | |
| RM-DSG3000 | Rack Mount kit for DSG3000 Signal Generators | DSG3000B | $104 | |
| AD-3.5F-2.92M-L-26G | Adapter, 3.5mm (f) - 2.92 (m), DC ~ 26.5GHz | DNA5000, DNA6000 | $109 | |
| AD-3.5M-2.92F-L-26G | Adapter, 3.5mm (m) - 2.92 (f), DC ~ 26.5GHz | DNA5000, DNA6000 | $109 | |
| MSO8000-FPC | MSO8000 Front Panel Cover | MSO8000 | $119 | |
| RM-2-DP800 | Rack Mount Kit for DP800 series Power Supplies and DL3000 Loads | DP800, DL3000, DP2000, DP900 | $122 | |
| RM-2-DG1000Z | Rack Mounting Kit for two DG1000Z | DG1000Z, DSG800, DG2000 | $134 | |
| RM-1-DP800 | Rack Mount Kit for DP800 series Power Supplies and DL3000 Loads | DP800, DL3000, DP2000, DP900 | $137 | |
| RM-DM3000 | Rack Mount Kit | DM3000 | $149 | |
| BAG-G1 | Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope. | DSA800, DS2000A, MSO2000A, MSO5000, DSA700, DG4000 | $155 | |
| KELVINTESTCLIP‐DMM | Kelvin Probe Set for 4 wire resistance measurements with a DMM | DM3000 | $159 | |
| RM-DG4000 | Rack Mount Kit | DG4000 | $159 | |
| RM-DG4000/DS1000Z | Rack Mounting Kit for a DG4000or DS1000Z | DS1000Z, DG4000 | $159 | |
| RM-DG | Rack Mounting Kit for a DMM or a DG1000 or DG2000 Series Generator. | DM3000 | $174 | |
| RM5041 | Ultra-Portable Platform Rack Mount Kit | DHO800, DHO900, MHO900, RSA800, DNA800, DG900 Pro | $179 | |
| CB-NM-NM-75-L-12G | N(M)-N(M) RF Cable | DSA800, DSG3000B, DSG800, RSA5000, RSA3000, DSA700 +2 | $199 | |
| CB-NM-SMAM-75-L-12G | N(M)-SMA(M) RF Cable | DSA800, DSG3000B, DSG800, RSA5000, RSA3000, DSA700 +2 | $199 | |
| TF-AENET-CME-STP | Automotive Ethernet Common-Mode Emission Board | DS70000, DS80000, DS9000, MSO9000 | $209 | |
| PVA9-R-150 | Lead resistance of welded probe head (150Ω, 4 pieces) | $229 | ||
| ATT03301H | 30dB High Power Attenuator, Max Power 100W | DSA800, RSA5000, RSA3000, DSA700, RSA6000, RSA800 | $230 | |
| DK-DS6000 | Demo Board for oscilloscopes | DS1000Z, DS2000A, MSO2000A, DS7000 / MSO7000, MSO5000, DS8000-R +1 | $231 | |
| TW12-19 | Torque Wrench, 12 in-lb, 19.1 mm-open end | DNA5000, DNA6000, DNA6000-R, DNA800 | $239 | |
| TW8-8 | Torque Wrench, 8 in-lb, 8.1 mm-open end | DNA5000, DNA6000, DNA6000-R, DNA800 | $239 | |
| RM-DG5000 | Rack Mounting Kit for a DG5000 Series Generator. | DG5000 | $249 | |
| RM6051 | Thunderbird Platform Rack Mount Kit | DHO5000, MHO5000, DS9000, MSO9000, MHO2000, RSA6000 +3 | $259 | |
| RM-1-M300 | Rack Mounting Kit for one M300 | M300 | $281 | |
| MSO5000-RM | Rack Mounting Kit | MSO5000 | $299 | |
| RM7011 | Rack mounting kit compatible with DG70000 and DS70000 series | DS70000 | $299 | |
| RM6041 | Rack Mount Kit for RSA5, RSA3, DS7000, MSO8000 | RSA5000, RSA3000, DS7000 / MSO7000, MSO8000 | $309 | |
| RF Adaptor Kit | Kit Includes: N(F)-N(F) Adaptor (1pcs), N(M)-N(M) Adaptor (1pcs), N(M)-SMA(F) Adaptor (2pcs), N(M)-BNC(F) Adaptor (2pcs), SMA(F)-SMA(F) Adaptor (1pcs), SMA(M)-SMA(M) Adaptor (1pcs), BNC T Type Adaptor (1pcs), 50 Ω SMA Load (1pcs), 50 Ω BNC Impedance Adapter (1pcs) | DSA800, DSG3000B, DSG800, RSA5000, RSA3000, DSA700 | $314 | |
| T2R1000 | Active probe adaptor for connecting TekProbe-BNC probes to a 7000 or 8000 series Oscilloscope | $314 | ||
| RM-2-M300 | Rack Mounting Kit for two M300 | M300 | $315 | |
| SCT-QB4500-2600 | Band-Pass Filter, 3.2GHz–5.8GHz | $339 | ||
| SCT-QB6000-3600 | Band-Pass Filter, 4.2GHz–7.8GHz | $339 | ||
| SCT-QB6500-1000 | Band-Pass Filter, 6.0GHz–7.0GHz | $339 | ||
| SCT-QB7000-1000 | Band-Pass Filter, 6.5GHz–7.5GHz | $339 | ||
| USB-GPIB | USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly | DS1000Z, DS2000A, DS7000 / MSO7000, MSO2000A, DG1000Z, DG4000 +9 | $346 | |
| USB-GPIB-L | USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly | DL3000, DG800, DG900, DG2000 | $346 | |
| CK106E | Basic Calibration Kit for RSA5/RSA3 VNA | RSA3000, RSA5000 | $349 | |
| CB-NM-3.5M-100-L-18G | RF Cable, DC ~ 18 GHz, N (m) - 3.5mm (m), 100 cm | DNA5000, DNA6000 | $369 | |
| CB-NM-NM-100-L-18G | RF Cable, DC ~ 18 GHz, N (m) - N (m), 100 cm | DNA5000, DNA6000 | $369 | |
| CB-NM-SMAM-100-L-18G | RF Cable, DC ~ 18 GHz, N (m) - SMA (m), 100 cm | DNA5000, DNA6000 | $369 | |
| CB-SMAM-SMAM-100-L-18G | RF Cable, DC ~ 18 GHz, SMA (m) - SMA (m), 100 cm | DNA5000, DNA6000 | $369 | |
| RM-DSA800 | Rack Mounting Kit for a DSA800 Series Spectrum Analyzer | DSA800 | $393 | |
| MC3120 | 20-channel Multiplexer | M300 | $399 | |
| RM2031 | Rack mount kit for the DSG5000 Series RF signal sources | DSG5000 | $399 | |
| CB-3.5M-3.5M-100-L-26G | RF Cable, DC ~ 26.5 GHz, 3.5 mm (m) - 3.5 mm (m), 100 cm | DNA5000, DNA6000 | $409 | |
| CB6200A New | RF Cable, DC ~ 26.5 GHz, 3.5 mm (m) - 3.5 mm (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| CB6200B New | RF Cable, DC ~ 26.5 GHz, 2.4mm (m) - 3.5mm (m), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| CB6201A New | RF Cable, DC ~ 18 GHz, SMA (m) - SMA (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| CB6201B New | RF Cable, DC ~ 26.5 GHz, 2.4mm (m) - 3.5mm (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| CB6202A New | RF Cable, DC ~ 18 GHz, N (m) - N (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| CB6203A New | RF Cable, DC ~ 18 GHz, N (m) - SMA (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| CB6204A New | RF Cable, DC ~ 18 GHz, N (m) - 3.5mm (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $409 | |
| RF CATV Kit | Kit Includes 50 Ω to 75 Ω Adaptor (2pcs) | DSA800, RSA5000, RSA3000, DSA700, RSA6000, RSA800 | $419 | |
| MC3416 | ACT Module | M300 | $439 | |
| PA1011 | 10W power amplifier for waveform generators | DG1000Z, DG4000, DG5000 | $451 | |
| CB6100B New | RF Cable, DC ~ 50 GHz, 2.4 mm (m) - 2.4 mm (m), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $459 | |
| CB6101B New | RF Cable, DC ~ 50 GHz, 2.4 mm (m)- 2.4 mm (f), 100 cm | DNA5000, DNA6000, DNA6000-R, DNA800 | $459 | |
| RM-DS2000 | Rack Mount Kit for the DS2000 and DS2000A Series Oscilloscope. | DS2000A, MSO2000A | $469 | |
| MC3132 | MUX32 Module | M300 | $499 | |
| MC3164 | MUX64 Module | M300 | $499 | |
| MCAL104-NF1 | Mechanical Calibration Kit, DC ~ 4.5 GHz, Type-N (f), 50 Ω | DNA5000, DNA6000, DNA6000-R, DNA800 | $499 | |
| MCAL104-NM1 | Mechanical Calibration Kit, DC ~ 4.5 GHz, Type-N (m), 50 Ω | DNA5000, DNA6000, DNA6000-R, DNA800 | $499 | |
| TF-AENET-MAT-STP New | Automotive Ethernet SMA-MATEnet adapter | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $519 | |
| TF-AENET-MTD-STP New | Automotive Ethernet SMA-HMTD adapter | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $519 | |
| TF-AENET-PAD-STP New | Car Ethernet welded adapter | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $519 | |
| RF Attenuator Kit | Kit Includes 6dB Attenuator (1pcs), 10dB Attenuator (2pcs) | DSA800, DSG3000B, DSG800, RSA5000, RSA3000, DSA700 +2 | $524 | |
| MC3648 | MATRIX Module | M300 | $539 | |
| MC3065 | DMM Module | M300 | $589 | |
| MC3324 | MIX Module | M300 | $599 | |
| MCAL104-SF1 | Mechanical Calibration Kit, DC ~ 4.5 GHz, SMA (f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $599 | |
| MCAL104-SM1 | Mechanical Calibration Kit, DC ~ 4.5 GHz, SMA (m) | DNA5000, DNA6000, DNA6000-R, DNA800 | $599 | |
| TF-USBH-STP | USB2.0 Host Compliance Test Fixture | DS70000, DS80000, DS9000, MSO9000 | $639 | |
| VB1032 | VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: ≥ 30 dB | DSA800, RSA5000, RSA3000 | $659 | |
| MC3534 | MFC Module | M300 | $669 | |
| VB1080 | VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz. | DSA800, RSA5000, RSA3000 | $734 | |
| DEMOKIT-M300 | Demo Kit for M300 | M300 | $799 | |
| DSA Utility Kit | DSA Accessories Package including：N-SMA Cable, BNC-BNC Cable, N-BNC Adapter, N-SMA Adapter, 75Ω-50Ω Adapter, Antenna 2（900MHz/1.8GHz）, Antenna 2（2.4GHz） | DSA800, RSA5000, RSA3000, DSA700, RSA6000, RSA800 | $831 | |
| TF-ENET10G-RL-STP | return-loss test fixture | DS70000, DS80000, DS9000, MSO9000 | $879 | |
| PVA9-DB01-3X | 200Ω Handheld Differential Probe Head | $899 | ||
| PVA9-DB01-6X | 450Ω Handheld Differential Probe Head | $899 | ||
| PVA9-DS01-3X | 200Ω Welded Differential Probe Head | $899 | ||
| PVA9-DS01-6X | 450Ω Welded Differential Probe Head | $899 | ||
| RX1000 | RF Demo Kit (Receiver) | DSA800, DSG3000B, DSG800, RSA5000, RSA3000 | $902 | |
| DG-POD-A | 16 Channel Digital Signal Generator Module for DG5000 Series Arbitrary Function Generators | DG5000 | $924 | |
| TX1000 | RF Demonstration board with built in 1 GHz Oscillator, mixer, filters, and amplifier. | DSA800, DSG3000B, DSG800, RSA5000, RSA3000 | $993 | |
| CK106A | Precision Calibration Kit for RSA5/RSA3 VNA | RSA3000, RSA5000 | $999 | |
| CF-PV&Deskew Kit-P-16GHz | Deskew and Performance Verification Kit | $1,059 | ||
| BatHolder350 | Battery compartment | DHO4000, DHO5000, MHO5000, MHO2000, DG5000 Pro | $1,099 | |
| CB-NMD3.5F-3.5F-63-L-26G | VNA RF Cable, DC ~ 26.5 GHz, NMD 3.5mm (f) - 3.5mm (f), 63.5 cm | DNA5000, DNA6000 | $1,099 | |
| DK-DNA10 | VNA Demo Board | $1,099 | ||
| ECAL304-NF2 | Basic ECal, 100 kHz ~ 4.5 GHz, Type-N (f), 50 Ω, 2 ports | DNA800 | $1,099 | |
| ECAL304-SF2 | Basic ECal, 100 kHz ~ 4.5 GHz, SMA (f), 50 Ω, 2 ports | DNA800 | $1,099 | |
| ECAL404-NF2 | Basic ECal, DC ~ 4.5 GHz, Type-N (f), 50 Ω, 2 ports | DNA800 | $1,099 | |
| ECAL404-SF2 | Basic ECal, DC ~ 4.5 GHz, SMA (f), 50 Ω, 2 ports | DNA800 | $1,099 | |
| TF-USBD-STP | USB2.0 Device Compliance Test Fixture | DS70000, DS80000, DS9000, MSO9000 | $1,189 | |
| CB8-L100 | 8-Port RF Integrated Cable, 1-Meter Length | $1,299 | ||
| OCXO-D08 | High stability timebase option for the DSG5000 Series RF signal sources | DSG5000 | $1,399 | |
| BNC Adapter Input 50 Ω | BNC Adapter Input 50 Ω | $1,580 | ||
| MCAL109-NF1 | Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (f), 50 Ω | DNA5000, DNA6000, DNA6000-R, DNA800 | $1,599 | |
| MCAL109-NM1 | Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (m), 50 Ω | DNA5000, DNA6000, DNA6000-R, DNA800 | $1,599 | |
| TF-AENET-MB-STP New | Car Ethernet distribution board | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $1,599 | |
| ECAL309-NF2 | Basic ECal, 100 kHz ~ 9 GHz, Type-N (f), 50 Ω, 2 ports | DNA800 | $1,799 | |
| ECAL309-SF2 | Basic ECal, 100 kHz ~ 9 GHz, SMA (f), 50 Ω, 2 ports | DNA800 | $1,799 | |
| ECAL409-NF2 | Basic ECal, DC ~ 9 GHz, Type-N (f), 50 Ω, 2 ports | DNA800 | $1,799 | |
| ECAL409-SF2 | Basic ECal, DC ~ 9 GHz, SMA (f), 50 Ω, 2 ports | DNA800 | $1,799 | |
| MCAL109-SF1 | Mechanical Calibration Kit, DC ~ 9 GHz, SMA (f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $1,899 | |
| MCAL109-SM1 | Mechanical Calibration Kit, DC ~ 9 GHz, SMA (m) | DNA5000, DNA6000, DNA6000-R, DNA800 | $1,899 | |
| DS80000-EMBDA | Embedded Trigger&Decode | DS80000 | $2,299 | |
| TFB-AENET-MAT-STP | Car Ethernet MATEnet interface fixture kit | DS70000, DS80000, DS9000, MSO9000 | $2,329 | |
| TFB-AENET-MTD-STP | Car Ethernet H-MTD interface fixture kit | DS70000, DS80000, DS9000, MSO9000 | $2,329 | |
| DSG5000-AMD | Analog Modulation Option for the DSG5000 - Modulate amplitude, frequency, and phase | DSG5000 | $2,699 | |
| High Impedance Adapter | HighImpedanceAdapter | DS80000 | $2,780 | |
| ECAL314-NF2 | Basic ECal, 100 kHz ~ 14 GHz, Type-N (f), 50 Ω, 2 ports | DNA800 | $2,999 | |
| ECAL314-SF2 | Basic ECal, 100 kHz ~ 14 GHz, SMA (f), 50 Ω, 2 ports | DNA800 | $2,999 | |
| ECAL414-NF2 | Basic ECal, DC ~ 14 GHz, Type-N (f), 50 Ω, 2 ports | DNA800 | $2,999 | |
| ECAL414-SF2 | Basic ECal, DC ~ 14 GHz, SMA (f), 50 Ω, 2 ports | DNA800 | $2,999 | |
| MCAL109-NK1 | Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (m & f), 50 Ω | DNA5000, DNA6000, DNA6000-R, DNA800 | $2,999 | |
| MCAL214-35F5 New | 4-in-1 OSLT Mechanical Calibration Kit, DC ~ 14 GHz, 3.5 mm (f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $3,099 | |
| MCAL214-35M5 New | 4-in-1 OSLT Mechanical Calibration Kit, DC ~ 14 GHz, 3.5 mm (m) | DNA5000, DNA6000, DNA6000-R, DNA800 | $3,099 | |
| MCAL109-SK1 | Mechanical Calibration Kit, DC ~ 9 GHz, SMA (m & f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $3,199 | |
| TF-ENET-STP | 10/100/1000M Ethernet Compliance Test Fixture | DS70000, DS80000, DS9000, MSO9000 | $3,269 | |
| TF-ENET10G-KIT-STP | 10G/5G/2.5G Ethernet Compliance Test Fixture KIT | DS80000 | $3,599 | |
| MCAL226-35F5 | 4-in-1 OSLT Mechanical Calibration Kit, DC ~ 26.5 GHz, 3.5 mm (f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $3,799 | |
| ECAL109-NF2 | Electronic Calibration Module, 100 kHz ~ 9 GHz, Type-N (f), 50 Ω, 2 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $3,999 | |
| ECAL114-NF2 | Electronic Calibration Module, 100 kHz ~ 14 GHz, Type-N (f), 50 Ω, 2 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $4,499 | |
| TF-USB30A-STP | USB-A/B Port Consistency Test Fixture | DS80000 | $4,689 | |
| MCAL126-35K1 | Mechanical Calibration Kit, DC ~ 26.5 GHz, 3.5 mm (m & f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $4,799 | |
| MCAL226-35M5 New | 4-in-1 OSLT Mechanical Calibration Kit, DC ~ 26.5 GHz, 3.5 mm (f) | DNA5000, DNA6000, DNA6000-R, DNA800 | $5,399 | |
| ECAL126-35F2 | Electronic Calibration Module, 100 kHz ~ 26.5 GHz, 3.5 mm (f), 2 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $5,999 | |
| TF-USB30C-STP | USB-C Port Consisitency Test Fixture | DS80000 | $6,139 | |
| ECAL109-NF4 New | Electronic Calibration Module, 100 kHz ~ 9 GHz, Type-N (f), 50 Ω, 4 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $8,699 | |
| TF-PCIE3-CLBX1X16-STP New | PCIE3 Compliance CLBX1X16 | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $8,849 | |
| MCAL114-NK1 New | Mechanical Calibration Kit, DC ~ 14 GHz, Type-N (m & f), 50 Ω | DNA5000, DNA6000, DNA6000-R, DNA800 | $9,399 | |
| TF-PCIE3-CBB-STP New | PCIE3 Compliance CBB | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $9,579 | |
| ECAL114-NF4 New | Electronic Calibration Module, 100 kHz ~ 14 GHz, Type-N (f), 50 Ω, 4 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $9,599 | |
| ECAL209-NF4 New | Electronic Calibration Module, DC ~ 9 GHz, Type-N (f), 50 Ω, 4 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $9,599 | |
| DS80000-RLU-20 | 2G Record length Option | DS80000 | $9,699 | |
| TF-PCIE3-CLBX4X8-STP New | PCIE Compliance CLBX4X8 | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $9,759 | |
| ECAL214-NF4 New | Electronic Calibration Module, DC ~ 14 GHz, Type-N (f), 50 Ω, 4 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $10,699 | |
| MCAL118-APC7 New | Airline Fixture and Calibration Kit | DNA5000, DNA6000, DNA6000-R, DNA800 | $10,699 | |
| ECAL126-35F4 New | Electronic Calibration Module, 100 kHz ~ 26.5 GHz, 3.5 mm (f), 4 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $12,899 | |
| ECAL226-35F4 New | Electronic Calibration Module, DC ~ 26.5 GHz, 3.5 mm (f), 4 ports | DNA5000, DNA6000, DNA6000-R, DNA800 | $14,299 | |
| TF-PCIE3-KIT-STP New | PCIE3 Compliance Test Fixture KIT | DS7000 / MSO7000, DS8000-R, DS70000, DS80000 | $27,519 |
Nothing matches those filters. Ask us: we can source most RIGOL parts.